Built for the Hood Paint Protection Film (PPF) - 2021+ Bronco, this StickerFab component delivers rugged durability, precise fitment, and trail-ready performance. Engineered for serious off-road use while maintaining everyday drivability.
Hood Paint Protection Film (PPF)
Hood protection PPF is something that has been requested for a little while. Pre-cut templates allow for easier installations. Whether you use your Bronco for long range commutes or in and around town, a little additional protection can go a long way.
The lower portion of the hood is angled downward a little more and the lead edge can take some harder hits than the rest of the hood as well.
Depending on your level of confidence, we are offering a full width model and a straight cut (easy install) model that stops short of the curved edges.
Please choose StickerFab Application Fluid as an add on if you do not have it already.
Material
Clear Oracal ORAGUARD 270G stone protection offers a transparent solution to paint protection. It is 6 mil in thickness.
NOTE: 2 sets are sold at a reduced price. Keep it as a backup or in case your first install proves to be difficult.
INSTALLATION
We recommend doing this after a fresh car wash. Re-clean the application area to prepare it for installation. Just use a wax free detailing spray if your vehicle is not too dirty. Do not forget to clean the areas under the side and lead edge of your hood to include the gaskets mounted to the hood. Also wash your hands. You do not want to get dirt stuck to the adhesive side of the PPF.
Watch our video for some tips.
NOTES: We recommend that the installation area be free of wax and not under direct sunlight.
Recommended Items:
- 2-3 people
- Microfiber
- Detailing Spray
-
StickerFab Application Fluid Preferred (or soapy water)
- Heat Gun or Hair Dryer Optional (minimal amounts of heat to encourage stretching and/or drying)
- Supplied Felt Tip Squeegee
You will want to do this in 70-80 degree weather ideally. Stay in the shade. 2-3 people will allow you to get this installation done a lot easier. We do not recommend going at it on your own.
One person will be pulling the vinyl off the backing as you go while the other holds the remainder of the material. The last person can monitor the process and step in as needed.
Apply application fluid or soapy water (one or two drops of soap per cup of water) to the target install and nearby surrounding area. Also apply it to the back of the PPF as it is removed from the backing paper.
With a liberal amount of application fluid on the target area and PPF, you can change the alignment of the PPF by gently pulling up on portions and setting it back down.
Once you alignment is ideal with an even amount of material extending over the sides and front of the hood, you can start to squeegee out the liquid. If you have the full width version, you will have to stretch the edges over the sides while firmly pressing down the curved areas.
Try to get out all bubbles without damaging the PPF. Take your time and learn how the material reacts to pressure. Should you push down hard on our felt tip squeegees, they can leave some glue residue. Any adhesive remover or Goo Gone should be able to remove that.
Currently, we do not have an installation guide available for this product. Please contact support for assistance.
At KOVA OFFROAD, we aim to get your order to you as quickly as possible.
Most orders ship within 3-5 business days. For backordered items, please allow 2-3 weeks.
If you need your product urgently, our support team is ready to assist you.
Enjoy free shipping on orders over $200, and track your order in real-time once it’s on the way.
Returns & Exchanges
- All returns must be authorized by KOVA Offroad before an item is shipped back.
- Return eligibility and timeframes may vary by manufacturer and product.
- Products must generally be unused, uninstalled, in new and resellable condition, and returned with all original packaging, hardware, and documentation.
- Original shipping charges are non-refundable unless the return is the result of an error or a confirmed defective product.
- Customers may be responsible for return shipping and any manufacturer or supplier restocking fees that apply.
- Do not ship a return to KOVA Offroad or directly to a manufacturer without receiving return authorization and return instructions from us first.
Obtaining Return Authorization
- Contact KOVA Offroad at sales@kovaoffroad.com with your order number, product information, and reason for the return.
- We will provide the appropriate return instructions and shipping location after the return has been approved.
- Returns sent without authorization may be refused or delayed.
Warranty & Defective Products
- Product warranties are provided by the individual manufacturer and vary by brand and product.
- KOVA Offroad does not independently manufacture or warrant third-party products, but we will assist customers with the warranty claim process whenever possible.
- If you believe a product is defective, contact us with your order number, a description of the issue, and photos or video if applicable.
- Warranty approval, replacement, repair, shipping costs, and claim requirements are subject to the manufacturer’s warranty policy.
- Do not return a defective product until return or warranty instructions have been provided.
Order Cancellations & Changes
- Contact us as soon as possible if you need to change or cancel an order.
- Once an order has entered processing or shipped, cancellation may no longer be possible.
- Special-order, custom, made-to-order, clearance, or certain manufacturer-direct products may not be cancellable or returnable.
- Any applicable cancellation or restocking fees will be communicated before the return or cancellation is completed.
Fitment
- Customers are responsible for reviewing the listed vehicle fitment before purchasing.
- If a customer is unsure whether a product fits their vehicle, they should contact KOVA Offroad before ordering, and we will help verify compatibility.
Questions?
Call us at (800) 507-0672 or email sales@kovaoffroad.com.
