Built for the 2023 Special Edition Style Rear Stripes fits 2022+ BRZ / GR86, this StickerFab component delivers rugged durability, precise fitment, and trail-ready performance. Engineered for serious off-road use while maintaining everyday drivability.
- Easy to install
- Instructions and installation video available below
- Sold as a full driver and passenger side set
2023 Special Edition Style Rear Stripes
We have sold special edition stripes for the A91 Supra and thought they would look good on the new BRZ / GR86 as well. The proportions of the vehicles are different and when Toyota made the official announcement, we knew we had to try it.
Over 15 tries at it and we found what seems to be the most aesthetically pleasing design in terms of complimenting the natural body lines of the vehicle.
NOTE: Sold as a set. 4 total stripes. 2 for driver's side and 2 for passenger side.
MATERIAL DETAILS
3D Carbon Dragon Wrap™ Carbon Fiber Film is a 5.6 mil calendared vinyl film featuring a clear repositionable permanent acrylic adhesive on an air-egress liner. This film has excellent dimensional stability, outstanding durability and outdoor performance. This repositionable permanent adhesive offers minimal initial bond growing to permanent bonds that facilitates application of large graphics. The air egress liner also aids in large graphic application.
Lasts up to 5 years outdoors.
Other materials are sourced in the USA as well.
Care Details:Concept Carbon Fiber film should be maintained to preserve long term appearance using standard aftercare products designed for textured exterior vinyl surfaces. A commercially available protectant such as Armor All or 303 Aerospace Protectant is recommended. DO NOT use waxes of any type.
INSTALLATION NOTES
Recommended tools:
Clean the application area and have soapy water available. Use a drop of dish soap mixed with a full cup of water. We favor our StickerFab Application fluid even more than soapy water though.
Ideal installation temperature is 70-80 degrees and not in direct sunlight or wind. The sunlight may heat up the body panels and/or vinyl too much. This causes it to become flimsy and the shape to change easily.
Apply some of the soapy water to the bottom of the vinyl. It will allow you to slide the vinyl around until you find the proper placement. It will also aide in removing air bubbles.
You want to get the alignment of the piece so that it contours the fenders. Start with the larger piece and use the defroster lines on the rear window as a point of reference. You will want to align the front edge of the larger piece at approximately the sixth defroster lines. Please see the photos.
Once you have to aligned, use your fingers (or a squeegee / credit card wrapped in microfiber) to push out the air and water. To speed up the process of drying you can use light heat from a heat gun or hair dryer.
When the first piece is aligned, begin to apply the smaller piece. It will sit behind the larger stripe by approximately 1 5/16" (or two fingers).
Repeat for the other side.
Currently, we do not have an installation guide available for this product. Please contact support for assistance.
At KOVA OFFROAD, we aim to get your order to you as quickly as possible.
Most orders ship within 3-5 business days. For backordered items, please allow 2-3 weeks.
If you need your product urgently, our support team is ready to assist you.
Enjoy free shipping on orders over $200, and track your order in real-time once it’s on the way.
Returns & Exchanges
- All returns must be authorized by KOVA Offroad before an item is shipped back.
- Return eligibility and timeframes may vary by manufacturer and product.
- Products must generally be unused, uninstalled, in new and resellable condition, and returned with all original packaging, hardware, and documentation.
- Original shipping charges are non-refundable unless the return is the result of an error or a confirmed defective product.
- Customers may be responsible for return shipping and any manufacturer or supplier restocking fees that apply.
- Do not ship a return to KOVA Offroad or directly to a manufacturer without receiving return authorization and return instructions from us first.
Obtaining Return Authorization
- Contact KOVA Offroad at sales@kovaoffroad.com with your order number, product information, and reason for the return.
- We will provide the appropriate return instructions and shipping location after the return has been approved.
- Returns sent without authorization may be refused or delayed.
Warranty & Defective Products
- Product warranties are provided by the individual manufacturer and vary by brand and product.
- KOVA Offroad does not independently manufacture or warrant third-party products, but we will assist customers with the warranty claim process whenever possible.
- If you believe a product is defective, contact us with your order number, a description of the issue, and photos or video if applicable.
- Warranty approval, replacement, repair, shipping costs, and claim requirements are subject to the manufacturer’s warranty policy.
- Do not return a defective product until return or warranty instructions have been provided.
Order Cancellations & Changes
- Contact us as soon as possible if you need to change or cancel an order.
- Once an order has entered processing or shipped, cancellation may no longer be possible.
- Special-order, custom, made-to-order, clearance, or certain manufacturer-direct products may not be cancellable or returnable.
- Any applicable cancellation or restocking fees will be communicated before the return or cancellation is completed.
Fitment
- Customers are responsible for reviewing the listed vehicle fitment before purchasing.
- If a customer is unsure whether a product fits their vehicle, they should contact KOVA Offroad before ordering, and we will help verify compatibility.
Questions?
Call us at (800) 507-0672 or email sales@kovaoffroad.com.
